Rebuilding the bearing pot was enjoyable, but it took ages to get the components
together and how they aligned. This is the clean up section. One problem was because
the seals were so badly mangled it was difficult to ensure which way they went in.
However a picture was located miraculously which displayed the layout and is displayed
at the end of these pictures.
Bearing pot seals, well chewed up
Oil, grime etc in bearing pot housing
Bearing pot components
Bearing pot and thrust cap - inner
Bearing pot and thrust cap outer
Bearing pot, cleaned and outer oil and water control seal groves
Bearing pot, note water outlet holes and oil inlet holes at back